Planet-technology G.SHDSL.bis Bridge Router GRT-504 Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Planet-technology G.SHDSL.bis Bridge Router GRT-504. Planet Technology G.SHDSL.bis Bridge Router GRT-504 User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 152
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - User’s Manual

4-Wire G.SHDSL.bis Firewall Router GRT-504 User’s Manual

Strany 2

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 1.2 Specification Product 4-Wire G.SHDSL.bis Firewall Router Model GRT-504 Hardware Sta

Strany 3

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.6 Example 6.6.1 LAN-to-LAN connection with bridge Mode PCIP: 192.168.0.1Netmask: 255.25

Strany 4 - Table of Contents

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Enter WAN1 Parameters VPI: 0 VCI: 32 Click LLCClick Next The screen will prompt the new con

Strany 5

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.6.2 LAN to LAN connection with routing mode IP: 192.168.20.1Netmask: 255.255.255.0STU-C

Strany 6

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Type the WAN1 Parameters; VPI: 0 VCI: 32 AAL5 Encap: LLC Protocol: IPoA , EoA , IPoA + NAT or

Strany 7

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Type LAN parameters: IP Address: 192.168.10.1 Subnet Mask: 255.255.255.0 Host Name: SOHO DHC

Strany 8 - 1 Descriptions

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual The screen will prompt the parameters that we will write in NVRAM. Check the parameters befor

Strany 9

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7 Configuration via Serial Console or Telnet with Manu Driven Interface In this section, t

Strany 10 - 1.2 Specification

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.1.3 Operation Interface For serial console and Telnet management, the Router implement

Strany 11 - Package Contents

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual The following table shows the parameters in the brackets. Command Description <ip> An

Strany 12 - 1.3 Applications

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.2 Main menu before enable When enter to menu on the following. All of the configuratio

Strany 13 - 2.1 Front Panel

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Package Contents The following items should be included. If any of these items are damaged o

Strany 14 - 2.2 Rear Panel

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.3 Enable To setup the router, move the cursor “ >>” to enable and press enter key.

Strany 15 - 2.4 Console Cable

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.4 Status You can view running system status of SHDSL.bis, WAN, route, interface, firewar

Strany 16 - Firewall

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.4.2 Wan Move cursor “ >> “ to Wan and press enter. ------------------------------

Strany 17 - 3.2.1 Packet Filtering

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.4.4 Interface Move cursor “ >> “ to Interface and press enter. ------------------

Strany 18 - 3.2.2 Circuit Gateway

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.4.6 IP_QoS Move cursor “ >> “ to IP_QoS and press enter. Select the Interface numbe

Strany 19 - 3.2.3 Application Gateway

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.4.7 STP Move cursor “ >> “ to STP and press enter. -------------------------------

Strany 20 - Inturruption

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.5 Show You can view the system information, configuration, and configuration in command

Strany 21

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 3 test 10 11392 1 3

Strany 22 - 4.2 Frame Specification

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual --- ---------------------------- 1 (Empty) 2 (Empty) 3 (

Strany 23 - 4.3 Applications

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Configuration Generic Parameter Telnet Listening TCP Port : 23 Trust Host IP Address

Strany 24

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 1.3 Applications 11

Strany 25

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.5.3 Configuration with Script format Move cursor to “ >> “ to script and press ente

Strany 26 - 5.1 Check List

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual setup wan 7 qos class UBR setup wan 7 qos pcr 11392 setup wan 7 qos scr 11392 setup wan 7 isp

Strany 27

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual setup dhcp generic gateway 192.168.0.1 setup dhcp generic netmask 255.255.255.0 setup dhcp ge

Strany 28

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.6 Write For any changes of configuration, you must write the new configuration to NVRAM

Strany 29

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.7 Reboot To reboot the router, please use “reboot” command. Move cursor to “ >>

Strany 30

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.8 Ping Ping command will be used to test the Ethernet connection of router or Internet

Strany 31

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.9 Administration You can modify the user profile, security, SNMP (Sample Network Managem

Strany 32 - Function Listing

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual The screen will prompt as follow: ----------------------------------------------------------

Strany 33 - 6.1 Basic Setup

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.9.3 SNMP Simple Network Management Protocol (SNMP) is the protocol not only governing n

Strany 34

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Move the cursor to edit and press enter, you can setup the following: Version: Disable, 1 or

Strany 35

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 2 Getting to know about the router This section will introduce hardware of the router. 2.1

Strany 36 - 6.1.2 Routing Mode

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.9.5 SNTP Time synchronization is an essential element for any business that relies on a

Strany 37

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual You can configure three time servers in this system with time_server1, time_server2, and time

Strany 38

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.10 Utility There are three utility tools, upgrade, backup and restore, which embedded i

Strany 39

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.10.3 Restore Move the cursor “ >> “ to restore and press enter. ------------------

Strany 40

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.11 Exit If you want to exit the system without saving, use exit command to quit system

Strany 41

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.12 Setup All of the setup parameters are located in the subdirectories of setup. Move th

Strany 42

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual You can setup the data rate by the multiple of 64Kbps where n is from 3 to 89. If the router

Strany 43

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual For dynamic IP of PPPoA and PPPoE, you do not need to setup IP address and subnet mask. The

Strany 44

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.12.4 Bridge You can setup the bridge parameters in bridge command. If the product is conf

Strany 45 - 6.1.3 Reference diagram

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.12.5 VLAN Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that a

Strany 46

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 2.2 Rear Panel The rear panel of SHDSL.bis router is where all of the connections are made

Strany 47 - 6.2 Advanced Setup

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual The member ports are tagged members. Use PVID command to change the member port to untagged m

Strany 48 - Stanby Mode

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual With Dynamic Routing, you can enable the Router to automatically adjust to physical changes

Strany 49 - 6.2.1.4 Data Rate

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Authe command can configure authentication code. You can review the list of RIP parameters v

Strany 50 - 6.2.1.5 SNR Margin

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual You can create five virtual IP address pool range in range command. --------------------

Strany 51 - 6.2.2 WAN

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual You can create up to 10 fixed NAT mapping entries via range command. --------------------

Strany 52

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual ---------------------------------------------------------------------- Command: setup ip_shar

Strany 53

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.12.11 Firewall 7.12.11.1 Firewall security level The product supports advanced firewall

Strany 54 - 6.2.3 Bridge

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual >> protocol Configure protocol type direction Configure direction mode src_ip

Strany 55

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual SYN flood: A SYN flood is a form of denial-of-service attack, attempts to slow your network b

Strany 56 - 6.2.4 VLAN

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.12.12 IPQoS IP QoS is a function to decide the priorities of setting IPs to transfer pac

Strany 57 - 6.2.4.2 Port-Based VLAN

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 2.3 SHDSL.bis Line Connector Below figure show the SHDSL.bis line cord plugs pin asignment

Strany 58

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.12.13 DHCP Dynamic Host Configuration Protocol (DHCP) is a communication protocol that l

Strany 59 - 6.2.5 STP

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.12.14 DNS proxy Enter the IP address via DNS proxy command. Move cursor “ >> “ to d

Strany 60 - 6.2.6 Route

EC Declaration of Conformity For the following equipment: *Type of Product : 4-wire G.SHDSL.bis Bridge Router w/4-port switch *Model Number : GR

Strany 61

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 3 Getting to know Firewall feature 3.1 Introduction A firewall protects networked compute

Strany 62

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 3.2 Types of Firewall There are three types of firewall: 3.2.1 Packet Filtering In pac

Strany 63 - 6.2.7 NAT/DMZ

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Internet192.168.0.10192.168.0.11192.120.8.5FirewallInternal/Protected Network External/Unprot

Strany 64

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 3.2.3 Application Gateway The Application Level Gateway acts as a proxy for applications, p

Strany 65 - 6.2.7.2 Mutli-NAT

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 1 Copyright Copyright© 2008 by PLANET Technology Corp. All rights reserved. No part of this

Strany 66 - 6.2.8 Virtual Server

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 3.3 Denial of Service Attack Inturruption Typically, Denial of Service (DoS) attacks re

Strany 67

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Hacker 'sSystemTargetSystemInternetTCP SYNrequestsBackingqueneTCP SYN-ACKPackets ICMP F

Strany 68 - 6.2.9 Firewall

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 4 Getting to know VLAN feature Virtual Local Area Network (VLAN) is defined as a group of d

Strany 69

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 68 octets. Such a frame is classified as belonging to a particular VLAN based on the value of

Strany 70

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 23

Strany 71

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 24

Strany 72

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 5 Configuration to the Router This guide is designed to let users through Web Configuration

Strany 73

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual The difference Protocols need to setup difference WAN parameters. After knowing the Protocol

Strany 74

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 5.2 Install the SHDSL.bis Router ! To avoid possible damage to this Router, do not turn on

Strany 75 - 6.2.10 IP QoS

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6 Configuration via Web Browser Step. 1 Click the start button. Select setting and contr

Strany 76

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual FCC Caution: To assure continued compliance (example-use only shielded interface cables when

Strany 77

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual In the Configuration window, select the TCP/IP protocol line that has been associated with yo

Strany 78 - 6.3 Status

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual The window will ask you to restart the PC. Click Yes button. After rebooting your PC, open

Strany 79 - 6.3.1 SHDSL.bis

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Function Listing Following is the G.SHDSL.bis router full function listing.  BASIC (Quick S

Strany 80 - 6.3.2 LAN

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.1 Basic Setup The Basic Setup contains Bridge or Route operation mode. User can use it to

Strany 81 - 6.3.3 WAN

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual The flow chart of bridge mode setup: Setup up system mode and SHDSL mode Click Bridge and

Strany 82 - 6.3.4 ROUTE

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual LAN: IP: 192.168.0.1 Subnet Mask: 255.255.255.0 Gateway: 192.168.0.254 (The Gateway IP is

Strany 83 - 6.3.5 INTERFACE

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.1.2 Routing Mode Parameter Table: System mode Route SHDSL □CO side □CPE side IP type

Strany 84 - 6.3.6 FIREWALL

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual The flow chart of route mode setup: Routing mode contains DHCP server, DHCP client, DHCP rel

Strany 85 - 6.3.7 IP QoS

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Set up the LAN IP address , Subnet Mask, Gateway, Host Name and Trigger DHCP Service with fix

Strany 86 - 6.3.8 STP

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Set up the DHCP Server parameters and fixed DHCP host table Start IP Address: This field s

Strany 87

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Table of Contents 1 DESCRIPTIONS ...

Strany 88 - 6.4 Administration

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Set up IP address, Subnet Mask, Host Name with DHCP Client mode LAN IP Type: Dynamic(DHCP

Strany 89

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Set up the WAN1 VPI, VCI Encap. and Protocol VPI: 0 VCI: 33 AAL5 Encap: LLC Protocol: PPPoA

Strany 90 - 6.4.2 SNMP

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Username : Enter the user name exactly as your ISP assigned. Password: Enter the password a

Strany 91 - 6.4.2.2 Trap host pool

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual IP Address: 10.1.2.1 It is router IP address like from Internet. Your ISP will provide it and

Strany 92 - 6.4.3 Time Sync

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Review The screen will prompt the parameters that will be written in NVRAM. Check the parame

Strany 93 - 6.4.3.2 SNTP v4.0

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.1.3 Reference diagram Bridge mode When configured in Bridge Mode, the router will act a

Strany 94 - 6.5 Utility

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual PCVPI:0, VCI:33Encapsulation: LLCDSLAMISPBASIP: 192.168.0.1Netmask: 255.255.255.0LANWANIP: 10

Strany 95 - 6.5.2 Config Tool

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2 Advanced Setup Advanced setup contains SHDSL.bis, WAN, Bridge, VLAN, Ethernet, Route,

Strany 96

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.1.2 Line Type There are six type of line type for you choose: 2-wire, M-Pair, M-Pair(Con

Strany 97 - 6.5.3 Upgrade

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Multi–Link Mode For 4-wire model, each pair will connect to two different remote device, whi

Strany 98 - 6.5.5 Restart

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.1.4 Data Rate...

Strany 99

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.1.5 SNR Margin This is an index of line connection quality. You can see the actual SNR

Strany 100 - 6.6 Example

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.2 WAN The router can support up to 8 PVCs. WAN 1 was configured via BASIC item except

Strany 101 - 6.6.1.2 CPE Side

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual If the WAN Protocol is IPoA or EoA, leave the ISP parameters as default setting. The system w

Strany 102 - 6.6.2.1 CO Side

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Username : Enter the user name exactly as your ISP assigned. Password: Enter the password

Strany 103 - 6.6.2.2 CPE side

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.3 Bridge If you want to setup advanced filter function while router is working in brid

Strany 104

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Press Add in the bottom of web page to add the static bridge information. If you want to fi

Strany 105

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.4 VLAN Click VLAN to configure VLAN. VLAN (Virtual Local Area Network) allows a phys

Strany 106 - Manu Driven Interface

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.4.1 802.1Q Tag-Based VLAN For setting 802.1Q VLAN click the 802.1Q Tagt-Based VLAN. The

Strany 107 - 7.1.4 Window structure

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual For setting Port-Based VLAN, Click Port-Based VLAN, The screem will prompt as following: Por

Strany 108

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.5 STP Click STP can disable or enable the bridge STP mode. STP (Spanning-Tree Protoc

Strany 109

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.5.2.2 Restore Configuration ...

Strany 110 - 7.3 Enable

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.6 Route If the Router is connected to more than one network, it may be necessary to se

Strany 111 - 7.4.1 Shdsl.bis

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual To modify the RIP (Routing information protocol) Parameters: RIP Mode: Enable Auto RIP Summa

Strany 112 - 7.4.3 Route

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Authentication required: None: for RIP, there is no need of authentication code. Password: t

Strany 113 - 7.4.5 Firewall

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.7 NAT/DMZ NAT (Network Address Translation) is the translation of an Internet Protocol

Strany 114 - 7.4.6 IP_QoS

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Press NAT/DMZ to setup the parameters. If you want to enable the NAT/DMZ functions, cli

Strany 115 - 7.4.7 STP

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.7.1 Multi-DMZ Some users who have two or more global IP addresses assigned by ISP can be

Strany 116 - 7.5.1 System information

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.8 Virtual Server Click Virtual Server to configure the parameters. There have te

Strany 117

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Press Modify for modify index 1. Type the necessary parameters and then click OK. Press Re

Strany 118

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.9 Firewall A firewall is a set of related programs that protects the resources of a

Strany 119 - 8 hours

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.9.1 Basic Firewall Security Click Basic Firewall Security. This level only enables t

Strany 120

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 7.9.2 Security...

Strany 121

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.9.2 Automatic Firewall Security Click Automatic Firewall Security. This level enable

Strany 122

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.9.3 Advanced Firewall Security Click Advanced Firewall Security and then press Finish.

Strany 123 - 7.6 Write

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Ping of Death: A ping of death (abbreviated ”POD”) attack attempts to crash your system by se

Strany 124 - 7.7 Reboot

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Packet filter Click Next can set up the packet filtering parameters. If you want to configure

Strany 125 - 7.8 Ping

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Press OK to finish. The screen will prompt the configured parameters. Click Enable on Trigge

Strany 126 - 7.9.1 User Profile

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.2.10 IP QoS IP QoS is a good function to decide which PCs can get the priorities to pass

Strany 127 - 7.9.2 Security

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Click Add in the bottom of web page to begin a new entry in IP QoS Policy table. Description

Strany 128 - 7.9.3 SNMP

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Click Finish can make a review for all IP QoS parameter To let the IP QoS configuration you

Strany 129

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.3 Status On STATUS item, you can monitor the following: SHDSL.bis Mode, Line rate, a

Strany 130 - 7.9.5 SNTP

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.3.1 SHDSL.bis The status information shows this is 4-wire model which have channel A an

Strany 131 - : 8 hours

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 1 Descriptions The Planet new SHDSL family member GRT-504 is the G.SHDSL.bis router that co

Strany 132 - 7.10.2 Backup

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.3.2 LAN This information shows the LAN interface status and DHCP client table. 79

Strany 133 - 7.10.3 Restore

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.3.3 WAN This information shows all eight WAN interface. 80

Strany 134 - 7.11 Exit

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.3.4 ROUTE This information shows the IP routing table. 81

Strany 135 - 7.12.2 SHDSL.bis

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.3.5 INTERFACE This table shows the interface statistics. 82

Strany 136 - 7.12.3 WAN

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.3.6 FIREWALL This information shows fireware status: DoS protection and dropped packets

Strany 137

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.3.7 IP QoS This information shows IP QoS statistics. 84

Strany 138 - 7.12.4 Bridge

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.3.8 STP This information shows the STP parameter: The bridge parameters have: Bridge

Strany 139 - 7.12.6 802.11Q VLAN

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Root Path Cost: The Cost of the Path to the Root from this Bridge, this is equal to the sum o

Strany 140 - 7.12.8 Route

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.4 Administration This session introduces security and simple network management protocol

Strany 141

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Legal address pool will setup the legal IP addresses from which authorized person can configu

Strany 142 - 7.12.10 IP share

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual ♦ Simple Network Management Protocol (SNMP):It is an easy way to remotely manage the router

Strany 143

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.4.2 SNMP Simple Network Management Protocol (SNMP) provides for the exchange of messages

Strany 144 - 7.12.10.2 PAT

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Press Modify to modify the community pool. You can setup the access authority. SNMP Status:

Strany 145 - 7.12.10.3 DMZ

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.4.3 Time Sync ime synchronization is an essential element for any business, which relies

Strany 146 - 7.12.11 Firewall

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.4.3.2 SNTP v4.0 For using the SNTP, select SNTP v4.0. SNTP is the acronym for Simple N

Strany 147 - 7.12.11.3 DoS Protection

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual . 6.5 Utility This section will describe the utility of the product including: SYSTEM I

Strany 148

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual The browser will prompt the system information. There will display general system informatio

Strany 149 - 7.12.12 IPQoS

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Choose the function and then press Finish 6.5.2.1 Load Factory Default Load Factory Def

Strany 150 - 7.12.13 DHCP

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.5.3 Upgrade You can upgrade the gateway using the upgrade function. Press Upgrade in UT

Strany 151 - 7.12.16 Default

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual 6.5.4 Logout To logout the router, press LOGOUT in UTILITY. For logout system and close

Strany 152 - EC Declaration of Conformity

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual Press Restart to reboot the router. When the restart button been clicked, the router will r

Komentáře k této Příručce

Žádné komentáře