Planet-technology ADE-3400 Uživatelský manuál

ADSL 2/2+ Router ADE-3400, ADE-4400 User’s Manual

1.3 Applications for the ADE-3400/4400 10

Chapter 2 Product Information 2.1 Package Contents ADE-3400/4400 ADSL 2/2+ Router CD-ROM containing the online manual Quick Installation Guide RJ-11 c

ADE-4400 LED Indicator LED Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. 2 ADSL: Lit when successfully conne

2.3 The Rear Ports ADE-3400 ADE-4400 Rear panel Port and Button Definition Port Meaning 1 9V AC: ADE-3400 12V DC: ADE-4400 Connect

2.4 Cabling One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the top

Chapter 3 Installation The router can be configured with your web browser. A web browser is included as a standard application in the following opera

double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4.

Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections.

4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address autom

3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio butt

Copyright Copyright (C) 2005 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed pr

Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols

3.2 Factory Default Settings Before configuring your ADSL router, you need to know the following default settings. Web Interface: User name:

3.3 LAN and WAN Port Addresses The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below. 3.4 Inform

3.5 Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “Go

Chapter 4 Configuration At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup

Mode: Select Routing (default). If your ISP allows multiple computers to share an Internet account. Otherwise select Bridge. Encapsulation: Sele

Service Name: Type the name of your PPPoE service here. User Name: Enter the user name exactly as your ISP assigned. Password: Enter the password

from the drop-sown list box. Refer to the NAT chapter (4.2.4) for more details. 4.1.3 1483 Routed IP Select 1483 Router IP from the Encapsulation d

IP Address: Type your ISP assigned IP address in the IP Address text box below. Subnet Mask: Enter a subnet mask in dotted decimal notation. Gatewa

User Name: Enter the user name exactly as your ISP assigned. Password: Enter the password associated with the user name above. IP Address: Type

FCC Compliance Statement The device confirmed to comply with the requirements of FCC Part 15 Rule. Operation is subject to the Following two conditio

4.1.6 Wizard Setup Configuration If you want to change your ADE-3400/4400 LAN settings, click Change LAN Configuration to display the screen as sh

LAN IP Address: Enter the IP address of ADE-3400/4400 in dotted decimal notation, for example, 192.168.1.254 (factory default). LAN Subnet Mask: Ent

4.2 Advanced setup 4.2.1 Password In factory setting, the default password is admin. You can change the default password to ensure that someon

Old Password: Type the default password or the existing password you use to access the system in this field. New Password: Type the new password in

DHCP: If set to Server, your ADE-3400/4400 can assign IP addresses, an IP default gateway, and DNS servers to Windows 95/NT and other systems that sup

4.2.3 WAN Setup A WAN (Wide Area Network) is an outside connection to another network or the Internet. It allows the user to set the configuration f

Half Bridge Name: Enter the name of your Internet Service Provider Mode: Select Routing (default) or Bridge Encapsulation: Select Bridge in the M

Virtual Circuit ID: VPI and VCI define a virtual circuit. VPI: The valid range for the VPI is 0 to 255 VCI: The valid range for the VCI is 32 to 6

multiple WAN connections. The LAN traffic is routed to appropriate WAN connections based on the destination IP addresses and Route Table. This elimina

Start Port No.: Enter a port number in this field. End Port No.: Enter a port number in this field. IP Address: Enter your server IP address in

all times to ensure the safe use of the equipment. To avoid struck by lightning, we suggest customers to add a device (lightning protector / surge pro

Local Start IP: This is the starting Inside Local IP Address. Local IP addresses are N/A for Server port mapping. Local End IP: This is the end Insi

the NAT to be accessible to the outside world. 4.2.4.4 Editing an Address Mapping Rule To edit an address mapping rule, click the rule’s link in

Global Start IP: This is the starting Inside Global IP Address (IGA). Enter 0.0.0.0 here if you have a dynamic IP address from your ISP. Global End IP

The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a static IP addr

Network Time Protocol (SNTP) to get the current time from an SNTP server outside your network. Choose your local time zone. After a successful connect

Time Server IP Address: Enter the IP address of your time server. Check with your ISP/network administrator if you are unsure of this information. T

4.2.8 Remote Management Remote management allows you to determine which services/protocols can access which ADE-3400/4400 interface from which comp

advantages for users running NAT routers through UPnP NAT Traversal, and on supported systems makes tasks such as port forwarding much easier by letti

Step 3. In the Communications window, select the Universal Plug and Play check box in the Components selection box. Step 4. Click OK to go ba

and select Optional Networking Components …. The Windows Optional Networking Components Wizard window displays. Step 4. Select Networking Se

Table of Contents Chapter 1 Introduction... 7 1.1 Introducing the ADE-3400/44

Auto-discover Your UPnP-enabled Network Device Step 1. Click start and Control Panel. Double-click Network Connections. An icon displays under In

Step 4. You may edit or delete the port mappings or click Add to manually add port mappings. Step 5. Select Show icon in notification area when

Step 6. Double-click on the icon to display your current Internet connection status. Web Configurator Easy Access With UPnP, you can access th

Step 4. An icon with the description for each UPnP-enabled device displays under Local Network. Step 5. Right-click on the icon for your ADE-3400/

Step 6. Right-click on the icon for your ADE-3400/4400 and select Properties. A properties window displays with basic information about the ADE-3400/4

Destination IP：This is the destination subnet IP address. Subnet Mask：It is the destination IP address based on above destination subnet IP. Gateway

4.4.1 System Status System Status: System Name: This is the name of the router. It is for identification purposes. RAS F/W Version: This is the

IP Address: This is the WAN port IP address IP Subnet Mask: This is the WAN port IP subnet mask. Default Gateway: This is the IP address of the de

System up Time: This is the elapsed time the system has been up. CPU Load: This field specifies the percentage of CPU utilization. WAN Port Statist

shows the port speed and duplex setting. TxPkts: This field displays the number of packets transmitted on this port. RxPkts: This field displays

4.2.3 WAN Setup... 35 4.2.4 NAT ...

4.4.4.1 Diagnostic-General TCP/IP Address: Type the IP address of a computer that you want to ping in order to test a connection. Ping: Click thi

Reset ADSL Line: Click this button to reinitialize the ADSL line. The large text box above then displays the progress and results of this operation

copy the firmware to your local environment first. Press the “Browse…” button to specify the path of the firmware file. Then, click “Upload” to start

4.4.6 Restart Click Restart with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to

4.5 Logout To exit the router’s web interface, choose Logout. Please ensure that you have saved the configuration settings before you logout. Be

Chapter 5 Troubleshooting If the ADSL Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before conta

Problems with the LAN Interface 66

Chapter 1 Introduction 1.1 Introducing the ADE-3400/4400 Planet ADE-3400/4400 ADSL 2/2+ Router is an “all-in-one” unit, combining an ADSL 2/2+ mod

It supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dm

conversion request packet from the PC to this router will be forwarded to the real DNS in the outside network. Dynamic Domain Name System (DDNS) T